SMC Furniture Table Mould

SMC Furniture Table Mould

A hydraulic press is usually used for molding moulds. The upper and lower parts of the mould are fixed on the press.

  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction

About SMC Mold:

A hydraulic press is usually used for molding moulds. The upper and lower parts of the mould are fixed on the press. A mold consists of a cavity and a core, the same as an injection mold. The test material is placed on the open mold, and then the press is closed. The set temperature and pressure generated by the press melt the raw material into the mold cavity.

The test materials of this kind of mold are usually SMC,BMC,GMT. Therefore, we often call this kind of mold SMC mold,BMC mold,GMT mold.

SMC is a sheet reinforced thermoplastic material, usually used for large products, which require greater strength.

BMC materials are clumpy, rich in short fibers, with excellent mechanical properties, low shrinkage, and color stability.

GMT is made of fiberglass reinforced thermoplastic, which can be widely used in various parts of automobile body. It can replace traditional metal parts, reducing weight and cost. Unlike injection moulds, SMC moulds need to be heated rather than cooled. The usual heating methods are steam, oil, electricity, and high-pressure water.

The temperature of SMC molds is usually between 140 and 160. When designing the temperature system of the mold, special care should be taken to keep the temperature of the whole surface of the mold consistent. Temperature uniformity can reduce deformation, improve dimensional stability, and product surface uniformity.


The navigation bar:

HOME ABOUT US PRODUCT NEWS KNOWLEDGE CONTACT US FEEDBACK


SMC series molding compound performance index:

Indicator name

unit

Index value ≥

4341 SMC-1

4343 SMC-2

4331 SMC-3

density

g/cm3

1.75-1.95

Water absorption

mg

≤20



Mold shrinkage

%

≤0.15

≤0.30

Heat distortion temperature (A method)

℃

≥240

≥220

Impact strength (simple bracket, no gap)

KJ/M2

≥90

≥60

≥45

Bending strength

MPa

≥170

≥150

≥135

Insulation resistance

normal

п

≥1.0*1013

1.0*1012

After soaking in water for 24h

≥1.0*1012

Electric strength (in transformer oil at 90℃)

MV/m

≥12.0

≥10.0

Dielectric loss factor (1MHz)

-

≤0.015

-

Relative permittivity (1MHz)

-

≤4.8

-

Arc resistance

S

≥180

≥150

Tracking Resistance Index(PTI)

V

≥600

Combustibility

class

FVO

-

Long-term heat resistance temperature index

-

155

130


About our company:

Taizhou Huangyan Jiutai Mold Co., Ltd. is a mold manufacturing company established in 2013. The company adheres to the business philosophy of "responsibility first, honesty first, steady operation and scientific management". The plastic products of the company have formed a one-stop service from product appearance design, mold development, product weight accurate budget, appearance coloring and mass production.

High quality products and high quality service to establish the strong vitality of the brand, is the same development strategy of Fengyu people, Fengyu is willing to work together with new and old customers to create a win-win situation.


FAQ:

Q: How to place an order?

Answer: You can contact any of our sales staff to place an order. Please provide details

Your requirements are as clear as possible. Therefore, we can send you a quotation as soon as possible.

If you need to design or discuss further, it is best to contact us via QQ or WeChat or other instant methods to prevent any delays.

Q: How do I know that your mold is working well?

A: Before shipment, we will test the working condition of the mold for you.


Hot Tags: SMC furniture table mould, China SMC furniture table mould manufacturers, factory, smc mold for injection molding, smc mold for transfer molding, smc mold for compression molding, smc mold with complex structure, smc mold for automotive, smc mold for resin products

You Might Also Like

(0/10)

clearall