-
![LFT Building Formwork Molds]()
Add to Inquiry -
![LFT Door Impact Beam Molds]()
Add to Inquiry -
![LFT Pallet Molds]()
Add to Inquiry -
![LFT-D Underbody Shield Mould]()
Add to Inquiry -
![LFT Storage Box Mould]()
Add to Inquiry -
![LFT Storage Box Change Board Mould]()
LFT Storage Box Change Board Mould
Add to Inquiry
Your Professional LFT Mould Supplier
JMJT is a professional manufacturer of GRP, SMC/BMC, GMT, LFT-D, HP-RTM, and PCM (thermoset plastic) compression molds, hot press molds, and plastic molds. We specialize in the design and manufacture of SMC/BMC sanitary ware molds, SMC/GMT/LFT-D/PCM automotive exterior trim molds, and other composite material molds.
High-Precision Manufacturing
By utilizing state-of-the-art CNC machining centers, EDM machines, and advanced surface treatment technologies, we ensure that every mold meets stringent tolerance requirements.
Certification
JMJT is ISO 9001 certified. ISO 9001 is an internationally recognized quality management system standard that helps organizations ensure their products and services consistently meet customer and applicable legal and regulatory requirements. It also promotes customer satisfaction through continuous improvement.
Sales Market
Our molds are exported to America, Europe, Africa, and Asia. We always consider quality as our foundation and customer service as our core principle. We sincerely look forward to cooperating with customers around the world
LFT is long fiber reinforced thermoplastic material that feature continuous fiber filaments running the full length of the pellet allowing these materials to exhibit simultaneous improvements in strength, stiffness, and impact resistance over a wide temperature range. it is compared with the ordinary fiber reinforced thermoplastic materials, usually, fiber reinforced thermoplastic materials in the fiber length is less than 1 mm, LFT moulding, the length of the fiber generally greater than 2 mm, the processing technology, has been able to keep the fiber length in LFT moulding over 5 mm. Depending on the end use, the finished product can be strip, strip, board of a certain width, or even rod shaped, directly used in place of thermosetting products.
|
Project Information |
||
|
Product Description |
Part Name |
Automotive windscreen Wiper |
|
Part Material |
LFT |
|
|
Part Size(MM) |
1232*240*123 |
|
|
Mould Steel |
A plate |
S50C |
|
B plate |
S50C |
|
|
Cavity Insert |
718 (HRC 34-38) |
|
|
Core Insert |
718 (HRC 34-38) |
|
|
Slider Insert |
/ |
|
|
Ejector Plate |
S50C |
|
|
Spare Parts |
S50C |
|
|
Mould Description |
Mould Size (L*W*H MM) |
1500*740*625 |
|
Mould Gross Weight (KG’s) |
5000KG |
|
|
Mould Life Time (Shots) |
300,000 |
|
|
Mould Manufacturing Cycle |
60 days |
|
|
Surface Finish |
Polishing |
|
|
Runner Description |
/ |
|
|
Injection Gate Type |
/ |
|
|
Ejection System |
Oil cylinder |
|
|
Cycle Time (Second) |
120s |
|
|
Compressionmoulding machine |
600T |
|
performance characteristics
(1) Lightweight high strength.
The density of LFT is about 1.1 g/cm, which is only 1/5-1/7 of steel, with tensile strength of 50-120MPa and bending strength of 90-120MPa;
(3)resistance to chemical corrosion.
This characteristic is mainly determined by the performance of the matrix material. There are many types of thermoplastic resins, and each resin has its own anti-corrosion characteristics. Therefore, the matrix resin can be optimized according to the use environment and medium conditions of LFT;
(2) Thermal performance.
The use temperature of general plastics is 50~100 ℃, which can be increased to more than 100 ℃ after using glass fiber reinforcement, and the use temperature of some special LFT can even be increased to more than 200 ℃. The linear expansion coefficient is 25%-50% lower than that of unreinforced plastics, and the thermal conductivity is 0.3-0.36W/(m K), which is very similar to that of thermosetting composites;
(4)Good dielectric properties.
LFT does not reflect radio waves, through the microwave performance is good. Adding conductive materials to LFT can improve its conductivity and prevent static electricity. As a new process technology that competes with GMT at the same time, LFT-D products are largely comparable to the excellent application performance brought by GMT.
|
Order Procedure |
|
|
1.Negotiation |
Quality,material,price,delivery time,payment and so on. |
|
2.Place an order |
We offer 3D drawing or according customer's design. |
|
3.R&D |
We can R&D to make the files and improve the design if you need. |
|
4.Design confirmation |
We will send 3D drawing to customer for confirmation before we make the mould. |
|
5.CNC processing |
CNC machine processing after confirm tne drawing. |
|
6.Testing mould |
Test tne mould after be finshed ,then product samples. |
|
7.Mass production |
If customers need to produce mass plastic products,we can offer. |
Certificate
FAQ
We're professional lft mould manufacturers in China, specialized in providing high quality customized service. If you're going to buy high-grade lft mould made in China, welcome to get quotation from our factory. For price consultation, contact us.
